Loading your next destination
Loading your next destination
Loading your next destination
Naffco Shield · Fire Detection
The sounder is connected to control panels which use the Shield protocol.The sounder is supplied with a yellow Isolator LED located at the top of the base (see Fig. 2 Base diagram) that is illuminated if a loop short circuit is detected.Drill out the cable entries and mounting holes as required on the base, taking care not to damage the electronics. Do not attempt to knock these out as the base will be damaged. Secure the base to the mounting surface with pan head screws.
Minimum order: 1 piece(s).
AED 507.80 total for 1 piece(s)
AED 507.80 per piece at this quantity. Delivery and tax calculated at checkout.
Standard city delivery across all seven UAE emirates. Enter your address at checkout to review delivery, tax and the final total before payment.
The sounder is connected to control panels which use the Shield protocol.The sounder is supplied with a yellow Isolator LED located at the top of the base (see Fig. 2 Base diagram) that is illuminated if a loop short circuit is detected.Drill out the cable entries and mounting holes as required on the base, taking care not to damage the electronics. Do not attempt to knock these out as the base will be damaged. Secure the base to the mounting surface with pan head screws. If IP65 integrity is required, fit the weatherproof mounting pad between the base and the mounting surface. Fit the ‘O’ ring to the base (Fig.2) using a lubricant such as silicone grease. To lock the sounder in the base, snip the break-out on the base rim (location shown in Fig 1.).F it the sounder to the base.
Related products
Confirm installation compatibility and statutory requirements with a qualified fire or safety professional before use.