
· Fire Alarm Systems
FA-507L Conventional Manual Pull Station
Price on request
View specifications & enquire →Loading your next destination
Loading your next destination
Product information · UAE & GCC
Edwards · Fire Alarm Systems
The SIGA-IM2 Isolator Module is part of EDWARDS’s Signature Series system. This intelligent device enables part of the Signature data loop to continue operating should a short circuit occur. The module can be wired into a Class A data loop at any point. If a fault occurs, the isolator cuts power to all devices beyond the isolator on the loop as follows: a short on the line causes all isolators to open within 23 at 10 msec intervals, beginning on one side of the Class A circuit nearest the loop controller, the isolators close to provide the next…
Price / availability on request
Request a quotation
Confirm availability, condition, delivery time and final order terms with our team.
The SIGA-IM2 Isolator Module is part of EDWARDS’s Signature Series system. This intelligent device enables part of the Signature data loop to continue operating should a short circuit occur. The module can be wired into a Class A data loop at any point. If a fault occurs, the isolator cuts power to all devices beyond the isolator on the loop as follows: a short on the line causes all isolators to open within 23 at 10 msec intervals, beginning on one side of the Class A circuit nearest the loop controller, the isolators close to provide the next isolator down the line with power. when the isolator next to the short closes, it reopens within 10 Once activated, the line fault isolator continuously checks the faulted side of the loop to determine if the short still exists. When the fault is corrected and system reset, the module automatically restores the entire data loop to the normal condition. The microprocessor in every Signature module provides at least three important benefits — Self-diagnostics and History Log, Automatic Device Mapping, and Fast, Stable Communication. Self-diagnostics and History Log - Each Signature Series module constantly runs self-checks to provide important maintenance information. This information is automatically updated and permanently stored in the module’s non-volatile memory and is accessible for review any time using the SIGA-HDT Signature Program / Service Tool. Automatic Device Mapping - The Signature loop controller learns keeps a map where each device’s serial number address is installed relative to other devices on the data circuit. Fast Stable Communication - Built-in intelligence means less information needs to be sent between the module and the loop controller. Other than regular supervisory polling response, the module only needs to communicate with the loop controller when it has something new to report.
• Automatic device mapping Each module transmits wiring information to the loop controller regarding its location with respect to other devices on the circuit. • Electronic addressing Addresses are downloaded and permanently stored from a PC, or the SIGA-HDT Signature Program / Service Tool. There are no switches or dials to set. • Ground fault detection by address Detects ground faults right down to the device level. 2-gang mounting
Description: Isolator Module – factory set hardware type code Address Requirements: Uses One Detector Address Circuit Resistance: Six ohms maximum between isolators Operating Current: Standby = 45µA; Activated = 45µA Operating Voltage: 15.2 to 19.95 Vdc (19 Vdc nominal) Construction & Finish: High Impact Engineering Polymer 2-gang front plate – White Finish Storage Environment: Temperature: -4°F to 140°F (-20°C to 60°C) Operating Environment: Temperature: 32°F to 120°F (0°C to 49°C); Humidity: 0 to 93% RH LED Operation: On-board Green LED – Flashes when polled (normal) Compatibility: Use with: Signature Loop Controller using 2nd Generation or newer non integrated isolation detectors and non isolated i/o modules Agency Listings: UL, ULC, CSFM, FM
Request this listed product by its full name and model or manufacturer part number. Safety Shops is based in Ajman Free Zone, UAE. We accept equipment enquiries from the United Arab Emirates, Saudi Arabia, Qatar, Oman, Kuwait, Bahrain.
Include the product link, exact suffix or size, quantity, delivery city and country, and any required project documents. For a replacement, include the installed equipment label so compatibility can be checked. Availability, documentation, shipping feasibility and lead time are confirmed in the quotation. Online Shop checkout delivery is within the UAE; other GCC destinations require an enquiry.
Price on request