TX7214 Addressable Broadcast Control Module

The TX7214 Addressable Broadcast Control Module is a part of TNA voice alarm system work as a switching module to control the emergency signal. The unit according to the pre-configured interface module command fire scenario, the alarm controller send out start command to the equipment required to start. After receiving the command, module enables its relay to change state. Once the module is under control and operated a confirmation signal will be sending back to the alarm controller. In addition, the unit incorporates an intelligent processor that provides automatic monitoring for both open and short circuit of the output signal line. The unit manufactured base on the requirement of EN 54 part 18, European Standard. The unit is aesthetically pleasing with unobtrusive design that will complement modern building designs and its plug-in type assembles make installation and maintenance more convenient to the installer. The unit is compatible to the TX7008 Analogue Intelli gent Fire Alarm Control Panel, produced by single manufacture T&A, to avoid addressable communi cation compatibility problem.

EN54-18 Compliance Built-in MCU processor and digital addressing 24VDC/2A Output relay contact and Control module Input Fire or Supervisory signal conguration LED status indicator Onsite Adjustable Parameter Loop or external power input Aesthetically pleasing design Surface mounting with fix base for simple installation

Compliance: EN 54-18:2005 Input Voltage: Loop Power:24VDC [16V to 28V] External PSU: 20 to 28VDC Current Consumption Loop: Standby 0.6mA, Alarm: 2.1mA External PSU: Standby 1.5mA, Alarm: 9.0mA Control output voltage: 24VDC / 2A rating Input Relay: Normally Open dry contact Protocol/Addressing: T&A, Value range from 1 to 254 Indicator Status: Normal: Fault blink/Active: Output Activation Steady /Fault: Fault Steady Material/Colour: ABS/White Glossy finishing Dimension/LWH: 108 mm x 86 mm x38 mm Weight: 160g (with Base), 89g (without Base) Operating Temperature: -10°C to +50°C Ingress Protection Rating: IP30 Humidity: 0 to 95% Relative Humidity, Non condensing