TX7210 Addressable Single Input/output Module

The TX7210 Addressable Single Input/output Module is characterized as one input or output volt free relay and control module. The unit is normally used for overriding equipment such as lift return, door holder, smoke extract fans, air handling unit, auto has built-in feedback signal feature, controller send out start command to the equipment required to start. After receiving the command, output module enables its relay to change state. Once the module is signal will be sending back to the alarm controller. In addition, the unit incorporates an intelligent processor that provides automatic monitoring for both open and short circuit of the input signal line. The unit manufactured base on the requirement of EN 54 part 18, European Standard. The unit is aesthetically pleasing with unobtrusive design that will complement modern building designs and its plug-in type assembles make installation and maintenance more convenient to the installer. The unit is compatible to the TX7004 Analogue Intelligent Fire Alarm Control Panel, produced by single manufacture T&A, to avoid addressable communication compatibility problem.

EN54-18:2005 Compliance • LPCB Approved • Built-in MCU processor and digital addressing • 24Vdc/3A Output relay contact and Control module • Input Fire or Supervisory signal • LED status indicator • Onsite Adjustable Parameter • Loop or external power input • Aesthetically pleasing design. Surface mounting with fix base for simple installation

Listed: LPCB / CE-CPR Compliance: EN54-18:2005 Input Voltage: Loop Power: 24VDC [16V to 28V] External PSU: 20 to 28VDC Current Consumption: Loop: Standby 0.6mA, Alarm: 1.6mA External PSU: Standby 0.6mA, Alarm: 45mA Control output voltage: 24VDC / 2A rating 24VDC /2A rating: Normally Open dry contact Input Resistance: 5.1Kohms/ ¼ W Protocol/Addressing: T&A, Value range from 1 to 254 Indicator Status: Normal: Single blink/Active: Steady/Fault: Double Blink Material/Colour: ABS / White Glossy finishing Dimension/LWH: 108 mm x 86 mm x38 mm Weight: 170g (with Base), 92g (without Base) Operating Temperature: -10°C to +50°C Ingress Protection Rating: IP30 Humidity: 0 to 95% Relative Humidity, Non condensing