TX7200 Addressable Input Module

The TX7200 Addressable Input Module is used to acknowledge normally open monitor signal from interface equipment then sending communication signal to the control panel, ideally for monitoring sprinkler system, pressure switch, position switch, signal valves and other third party equipment such as conventional panel. The unit manufactured base on the requirement of EN 54 part 18, European Standard. The unit is aesthetically pleasing with unobtrusive design that will complement modern building designs and its plug-in type assembles make installation and maintenance more convenient to the installer. The unit incorporates an intelligent processor that provides automatic monitoring for both open and short circuit of the input signal line. The TX7200 Input Module is compatible to the TX7004 Analogue Intelligent Fire Alarm Control Panel, produced by single manufacture T&A, to avoid addressable communication compatibility problem.

EN54-18 Compliance LPCB Pending Built-in MCU processor and digital addressing Input cable monitored LED status indicator Loop powered device Aesthetically pleasing design Surface mounting with fix base for simple installation Normal open configuration File or Supervisory signal configuration

Listed: LPCB Pending Compliance: EN54-18:2005/AC2007 Input Voltage: 24VDC [16V to 28V] Current Consumption Standby: 0.6mA, Alarm: 1.0Ma Protocol/ Addressing: T&A, Value range from 1 to 254 Input Relay: Normally Open dry contact Input Resistance: 5.1Kohms/ ¼ W Indicator Status Normal: Single blink/Active: Steady/Fault: Double Blink Material/Colour: ABS/White Glossy finishing Dimension/LWH: 108 mm x 86 mm x38 mm Weight: 155g (with Base), 85g (without Base) Operating Temperature: -10°C to +50°C Ingress Protection Rating: IP30 Humidity: 0 to 95% Relative Humidity, Non condensing