WPC 2000 | Wintriss Clutch/Brake Control
Wintriss · Motors & Motion
Description The Wintriss WPC 2000 is a dual-microprocessor-based clutch/brake control system designed for part-revolution mechanical power presses. It integrates advanced safety, diagnostic, and press-timing features into a compact, modular enclosure, meeting ANSI and OSHA Control Reliability standards. Technical Specifications Condition New/Never Used Surplus Brand Wintriss Category Controls & Indicators Part Number WPC 2000 Subcategory Control Accessory Enclosure Dimensions 14.00 x 19.62 x 7.00 in. (355.6 x 498.3 x 177.8 mm), NEMA 12, shock-mounted Panel Mount Dimensions 7.50 x 10.00 in. (190.5 x 254.0 mm) Operating Voltage 24 ± 5% VDC, 2 A (if not using AC supply) AC Power Supply (Included) Input: 100–240 VAC, 75 VA; Output: 24 ± 1% VDC, 200 mA Temperature Range 32°F to 122°F (0°C to 50°C) Inputs Resolver, Overrun limit switch, 2 operator stations, DSV monitor, Air pressure switch Additional Inputs Shadow light curtains, Motor forward/reverse, Cross-checked E-stop pairs Outputs DSV relays (2x, 4 A @ 120 VAC), Lockout relay, Auxiliary stop, Optional E-stop relays Speed Range 7–500 SPM standard; 500–2000 SPM optional Display 6-digit LED: crank angle, press speed, stop time, error codes, test values Event Counters Presettable stroke counter (6-digit) for QC and batch control Mounting Accessories Resolver shaft: 0.75 in. keyed, rated 200 lb axial/radial load Operator Station NEMA 12 with palm buttons, top-stop, E-stop, mute, prewired or unwired DSV Compatibility Ross DM2, 0.75 in. or 1.0 in. models Weight 4.50 Lbs Information About WPC 2000 The WPC 2000 provides precise press operation and operator safety for part-revolution presses by using resolver-based crankshaft tracking, eliminating the need for mechanical rotary limit switches. Its resolver generates real-time angle signals to determine crank position, enhancing accuracy for stopping and stroke control. The system supports full integration with ancillary equipment, operator stations, and safety systems such as Shadow® light curtains. Equipped with a bright six-digit LED display, the WPC 2000 shows crank angle, press speed, error codes, and diagnostics. Standard features include an internal brake monitor, Interrupted Stroke handling, nine customized status codes, micro-inch mode for precise setup, and a 90° stop-time test. It also allows connectivity with SmartPAC® 2 or SmartPAC PRO systems for enhanced automation. Optional features include auxiliary E-stop output relays, programmable cam switches, foot/one-hand control, and auto-compensated top stop (ACTS). Key Features: Resolver-Based Operation: Accurately tracks crankshaft angle in real time without rotary limit switches. Interrupted Stroke Recovery: Switches to safe mode upon emergency stop and automatically reverts after reset. Brake Monitor: Checks top-stop performance on every cycle with stop-time limit and warning LEDs. Custom Status Inputs: Nine programmable codes, including two cross-checked pairs for safety functions. Micro-Inch Feature: Allows precision control of valve opening time for fine setup on high-speed presses. Error Code Diagnostics: Two-digit LED codes identify specific processor and failure type (E, F, H). Lockout Mode: Prevents restart until faults are acknowledged and reset, supporting OSHA safety requirements. 90° Stop-Time Test: Verifies system stopping distance in compliance with OSHA and ANSI standards. Dual Processor Architecture: Separate logic/control processors with independent power supplies for redundancy. SmartPAC Compatibility: Integrates with SmartPAC® 2 or PRO for enhanced automation and job management. The WPC 2000 ensures safe, compliant press operation with modular expandability, system diagnostics, and high-speed press compatibility, improving both productivity and protection.
Brand: Wintriss · Category: Motors & Motion
Key features
- Resolver-Based Operation: Accurately tracks crankshaft angle in real time without rotary limit switches.
- Interrupted Stroke Recovery: Switches to safe mode upon emergency stop and automatically reverts after reset.
- Brake Monitor: Checks top-stop performance on every cycle with stop-time limit and warning LEDs.
- Custom Status Inputs: Nine programmable codes, including two cross-checked pairs for safety functions.
- Micro-Inch Feature: Allows precision control of valve opening time for fine setup on high-speed presses.
- Error Code Diagnostics: Two-digit LED codes identify specific processor and failure type (E, F, H).
- Lockout Mode: Prevents restart until faults are acknowledged and reset, supporting OSHA safety requirements.
- 90° Stop-Time Test: Verifies system stopping distance in compliance with OSHA and ANSI standards.
- Dual Processor Architecture: Separate logic/control processors with independent power supplies for redundancy.
- SmartPAC Compatibility: Integrates with SmartPAC® 2 or PRO for enhanced automation and job management.
Specifications
| Manufacturer part number | WPC 2000 |
|---|---|
| Condition | New/Never Used Surplus |
| Brand | Wintriss |
| Category | Controls & Indicators |
| Part Number | WPC 2000 |
| Subcategory | Control Accessory |
| Enclosure Dimensions | 14.00 x 19.62 x 7.00 in. (355.6 x 498.3 x 177.8 mm), NEMA 12, shock-mounted |
| Panel Mount Dimensions | 7.50 x 10.00 in. (190.5 x 254.0 mm) |
| Operating Voltage | 24 ± 5% VDC, 2 A (if not using AC supply) |
| AC Power Supply (Included) | Input: 100–240 VAC, 75 VA; Output: 24 ± 1% VDC, 200 mA |
| Temperature Range | 32°F to 122°F (0°C to 50°C) |
| Inputs | Resolver, Overrun limit switch, 2 operator stations, DSV monitor, Air pressure switch |
| Additional Inputs | Shadow light curtains, Motor forward/reverse, Cross-checked E-stop pairs |
| Outputs | DSV relays (2x, 4 A @ 120 VAC), Lockout relay, Auxiliary stop, Optional E-stop relays |
| Speed Range | 7–500 SPM standard; 500–2000 SPM optional |
| Display | 6-digit LED: crank angle, press speed, stop time, error codes, test values |
| Event Counters | Presettable stroke counter (6-digit) for QC and batch control |
| Mounting Accessories | Resolver shaft: 0.75 in. keyed, rated 200 lb axial/radial load |
| Operator Station | NEMA 12 with palm buttons, top-stop, E-stop, mute, prewired or unwired |
| DSV Compatibility | Ross DM2, 0.75 in. or 1.0 in. models |
| Weight | 4.50 Lbs |
| Product type | Control Accessory |
Contact Safety Shops for pricing, delivery and project support in the UAE.