JL258A | HP Networking Aruba 2930F 8G PoE+ 2SFP+ Switch

HP Networking · HMIs & Displays

Description  The HP JL258A is an Aruba 2930F 8G PoE+ 2SFP+ Switch, designed for small enterprise and branch office deployments.     Technical Specifications  Condition New/Never Used Surplus Brand HP Networking Category Networking Equipment Part Number JL258A Subcatecory Compact Layer 3 PoE+ Access Switches I/O Ports And Slots 8 RJ-45 autosensing 10/100/1000 PoE+ ports (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type 100BASE-TX, IEEE 802.3ab Type 1000BASE-T, IEEE 802.3at PoE+) Duplex: 10BASE-T/100BASETX: half or full 1000BASE-T: full only Additional Ports And Slots  1 dual-personality (RJ-45 or USB micro-B) serial console port Memory And Processor Dual Core ARM Coretex A9 @ 1016 MHz, 1 GB DDR3 SDRAM Packet buffer size: 12.38 MB 4.5MB Ingress/7.785 Egress, 4 GB eMMC 1000 Mb Latency < 3.8 μs (64-byte packets 10 Gbps Latency < 1.6 μs (64-byte packets) Throughput Up to 41.7 Mp/s Switching Capacity  56 Gb/s Routing Table Size  10000 entries (IPv4), 5000 entries (IPv6) MAC Address Table Size 32768 entries Maximum Heat Dissipation 558.09 kJ/hr ( 529 BTU/hr) Voltage 90 - 264 V ac, rated Current 1.5/0.8 A Maximum Power Rating  155 W Frequency 50/60 Hz PoE power 125 W PoE+ Operating Temperature 0°C to 45°C (32°F to 113°F) up to 5000 Feet - 0C to 40C (32F to 104F) up to 10000 Feet Operating Relative Humidity 15% to 95% @ 40°C ( 104°F) noncondensing Nonoperating/Storage Temperature -40°C to 70°C (-40°F to 158°F) up to 15000 Feet Airflow Direction  Side-to-side Dimensions 4.39 x 25.4 x 25.4 cm ( 1.73 x 10 x 10 in) 1U height Weight 1.59 kgs       Information About JL258A The HPE JL258A is a compact, fully managed Layer 3 switch from the Aruba 2930F Series, engineered for branch offices, SMBs, and enterprise edge deployments. Featuring 8 Gigabit PoE+ ports and 10-Gigabit SFP+ uplinks, it delivers reliable connectivity, intelligent management, and robust security for modern digital workplaces. With support for cloud-based management and stacking, the JL258A offers flexibility, scalability, and simplified deployment in space-constrained environments. Key Features: Ethernet Ports: 8 × 10/100/1000 Mbps RJ-45 PoE+ ports Uplink Interfaces: 2 × 10 Gigabit SFP+ uplink ports Power over Ethernet (PoE+): Up to 125W total PoE budget; supports IEEE 802.3at Stacking: Supports Virtual Switching Framework (VSF) for stacking up to 8 switches Switching Capacity: 56 Gbps Forwarding Rate: 41.7 Mpps Memory: 1 GB RAM, 4 GB Flash Security Features: IEEE 802.1X, MAC authentication, Web authentication, RADIUS, TACACS+, ACLs, port security Energy Efficiency: Supports Energy Efficient Ethernet (IEEE 802.3az) Management: CLI, web GUI, Aruba Central, REST APIs, AirWave, SNMP, Zero Touch Provisioning Software: Aruba Layer 3 image with static IPv4/IPv6, RIP, RIPng, Access OSPF Redundancy: External AC power adapter; no internal redundant PSU Form Factor: 1U rack-mountable; also supports desktop, wall, or under-table mounting Operating Range: 0°C to 45°C; 15% to 95% humidity (non-condensing) This switch is ideal for edge deployments requiring compact size, PoE+ for IP devices, and Layer 3 routing. The JL258A delivers enterprise-grade features and simplified cloud-based or on-premises management, making it a cost-effective and scalable solution for agile network environments.

Brand: HP Networking · Category: HMIs & Displays

Key features

• Ethernet Ports: 8 × 10/100/1000 Mbps RJ-45 PoE+ ports
• Uplink Interfaces: 2 × 10 Gigabit SFP+ uplink ports
• Power over Ethernet (PoE+): Up to 125W total PoE budget; supports IEEE 802.3at
• Stacking: Supports Virtual Switching Framework (VSF) for stacking up to 8 switches
• Switching Capacity: 56 Gbps
• Forwarding Rate: 41.7 Mpps
• Memory: 1 GB RAM, 4 GB Flash
• Security Features: IEEE 802.1X, MAC authentication, Web authentication, RADIUS, TACACS+, ACLs, port security
• Energy Efficiency: Supports Energy Efficient Ethernet (IEEE 802.3az)
• Management: CLI, web GUI, Aruba Central, REST APIs, AirWave, SNMP, Zero Touch Provisioning
• Software: Aruba Layer 3 image with static IPv4/IPv6, RIP, RIPng, Access OSPF
• Redundancy: External AC power adapter; no internal redundant PSU
• Form Factor: 1U rack-mountable; also supports desktop, wall, or under-table mounting
• Operating Range: 0°C to 45°C; 15% to 95% humidity (non-condensing)

Specifications

Contact Safety Shops for pricing, delivery and project support in the UAE.