IC695PSD040 | GE Fanuc PACSystems RX3i 24VDC 40W Power Supply Module

GE Fanuc · PLCs & Industrial Controllers

Description  The GE Fanuc IC695PSD040 is a 40W DC power supply module from the PACSystems RX3i Series. It delivers regulated 5.1 VDC and 3.3 VDC outputs from a 24 VDC nominal input, ensuring stable power for RX3i PLC modules in demanding industrial environments.     Technical Specifications  Condition New/Never Used Surplus Brand GE Fanuc Category PLCs/Machine Control Part Number IC695PSD040 Subcategory PLC Module/Rack Series PACSystems RX3i Type Universal Base Power Supply Nominal Input Voltage 24 VDC Input Voltage Range Start: 18–30 VDC; Run: 12–30 VDC Input Power 60 W maximum Output Power 40 W maximum combined Output Voltages 5.1 VDC (5.0–5.25 V), 3.3 VDC (3.2–3.465 V) Output Current 5.1 VDC: 0–6 A; 3.3 VDC: 0–9 A Ripple/Noise 50 mV Inrush Current 4 A, 100 ms maximum Ride-Through Time 10 ms Isolation None LED Indicators Power, P/S Fault, Overtemperature, Overload On/Off Switch Yes (protected) Wiring Terminals 14–18 AWG, up to 6 A Daisy-Chaining Supports up to 2 supplies Slot Assignment Slot 0 (RX3i universal backplane) Operating Environment Pollution Degree 2 Power Supply Redundancy Not supported Weight 0.75 lbs     Information About IC695PSD040 The IC695PSD040 is part of the PACSystems RX3i line, designed as a universal base power supply for RX3i backplanes. It accepts a nominal 24 VDC input, with an operating range of 18–30 VDC (start mode) and 12–30 VDC (run mode), providing up to 40W of total output power. The module distributes regulated 5.1 VDC and 3.3 VDC outputs, supporting up to 6 A and 9 A respectively, with ripple and noise limited to 50 mV. It features LED indicators for power, fault, overtemperature, and overload conditions, as well as an on/off switch with a protective cover. With support for daisy-chaining up to two units, this supply provides dependable power for modular PLC systems. Key Features: Nominal Input Voltage: 24 VDC with 18–30 VDC operating range. Dual Outputs: Provides 5.1 VDC (0–6 A) and 3.3 VDC (0–9 A). Output Power: Maximum 40 W combined across outputs. Inrush Current: 4 A for 100 ms maximum. Ride-Through Capability: Maintains valid outputs for up to 10 ms during interruptions. LED Indicators: Monitors power, faults, temperature, and overload. On/Off Switch: Accessible behind a protective cover for safety. Installation: Fits into RX3i universal backplane, Slot 0 position. Wiring Terminals: Accepts 14–18 AWG wire, rated for 6 A current. Daisy-Chaining: Supports up to two IC695PSD040 supplies. The IC695PSD040 delivers the stable power and protection features required for RX3i-based PLC automation systems.

Brand: GE Fanuc · Category: PLCs & Industrial Controllers

Key features

• Nominal Input Voltage: 24 VDC with 18–30 VDC operating range.
• Dual Outputs: Provides 5.1 VDC (0–6 A) and 3.3 VDC (0–9 A).
• Output Power: Maximum 40 W combined across outputs.
• Inrush Current: 4 A for 100 ms maximum.
• Ride-Through Capability: Maintains valid outputs for up to 10 ms during interruptions.
• LED Indicators: Monitors power, faults, temperature, and overload.
• On/Off Switch: Accessible behind a protective cover for safety.
• Installation: Fits into RX3i universal backplane, Slot 0 position.
• Wiring Terminals: Accepts 14–18 AWG wire, rated for 6 A current.
• Daisy-Chaining: Supports up to two IC695PSD040 supplies.

Specifications

Contact Safety Shops for pricing, delivery and project support in the UAE.