AFP-200 | Notifier Fire Alarm Control Panel

Notifier · Fire & Life Safety

Description  The Notifier AFP-200 is an intelligent addressable fire alarm control panel designed for mid-sized commercial or institutional buildings. It supports up to 198 intelligent devices and features advanced detection, releasing, and notification capabilities.     Technical Specifications  Condition New/Never Used Surplus Brand Notifier Category Drives Part Number AFP-200 Subcategory Control/Interface Board Primary Input Power 120 VAC, 50/60 Hz, 3.0 A  Total 24 VDC Output Power 5.0 A (shared across internal loads and NACs) NAC Circuits 4 total; NAC 1: 2.25 A; NAC 2–4: 2.25 A shared (3.0 A w/ APS-6R) Smoke Detector Power 500 mA (four-wire detector output) Auxiliary Non-resettable Power 500 mA Battery Charging Range 7–18 AH standard; dual-rate up to 90 hours standby Charger Voltage High rate: 29.1 V, Float: 27.0 V Relay Contact Rating 2.0 A at 30 VDC Addressable Points 198 intelligent (99 detectors + 99 modules) Total Point Capacity 301 (including NACs and programmable relays) Display 80-character backlit LCD Event History Storage 650 events, non-volatile w/ shadow memory Cabinet Dimensions (HxWxD) 16.125" x 14.5" x 5.5" (40.96 x 36.83 x 13.97 cm) Weight 2.12 lbs       Information About AFP-200 The AFP-200 provides intelligent control over up to 198 addressable devices (99 detectors and 99 modules) using Style 4, 6, or 7 wiring. It includes four built-in NACs with a total output of 5.0 A regulated 24 VDC power, expandable up to 8.0 A with the APS-6R power supply. Two circuits can be configured for 3.0 A output when expanded. The panel also delivers 500 mA for four-wire smoke detectors and 500 mA of non-resettable auxiliary power. It supports battery charging for 7 AH to 18 AH batteries and dual-rate charging for up to 90 hours of standby. Designed for flexible use, the AFP-200 includes pre-alarm features (AWACS™), drift compensation, day/night sensitivity modes, auto detector testing, and programmable maintenance alerts. Releasing capabilities include four independent hazards, abort functions, cross-zone logic, and discharge timers. The system is field-programmable and supports an LCD-80 remote display, EIA-485 ACS annunciators, printer interfaces, and remote modem access. It stores up to 650 events in non-volatile memory with shadow history and allows per-point configuration of verification, PAS presignal, and walk test features. Key Features: 198 Intelligent Device Capacity: Supports 99 analog detectors and 99 monitor/control modules across Style 4, 6, or 7 circuits. Integrated Notification Circuits: Four NACs totaling 5.0 A (expandable to 8.0 A); circuits 3 & 4 increase to 3.0 A with APS-6R. Releasing Control Functions: Four independent hazard zones, configurable cross-zoning, delay/discharge timers, and abort inputs. Advanced Detection Logic: Includes AWACS™ pre-alarm, manual/day-night sensitivity adjustment, drift compensation, and maintenance alerts. Power Supply & Charger: 120/230 VAC input, 24 VDC regulated output, 7–18 AH battery support, and high/float charge voltage regulation. Programming & Interfaces: Field or PC programmable with Autoprogram, password protection, printer and LCD interfaces, remote modem access. Event History & Diagnostics: Stores 650 non-volatile events with real-time clock, shadow history, walk test checks, and PAS presignal support. Annunciation & Expansion: LCD-80, ACS series annunciators, LDM custom annunciation, and printer support over EIA-485. Regulatory Compliance: Compliant with NFPA 72, UL-listed; offers flexible regional formatting (e.g., European time/date). Retrofit Detector Support: Compatible with various non-Notifier detectors using FZM-1 interface for legacy system upgrades. The AFP-200 combines intelligent device control, releasing logic, and full-featured programming into one powerful panel for scalable fire protection systems.

Brand: Notifier · Category: Fire & Life Safety

Key features

• 198 Intelligent Device Capacity: Supports 99 analog detectors and 99 monitor/control modules across Style 4, 6, or 7 circuits.
• Integrated Notification Circuits: Four NACs totaling 5.0 A (expandable to 8.0 A); circuits 3 & 4 increase to 3.0 A with APS-6R.
• Releasing Control Functions: Four independent hazard zones, configurable cross-zoning, delay/discharge timers, and abort inputs.
• Advanced Detection Logic: Includes AWACS™ pre-alarm, manual/day-night sensitivity adjustment, drift compensation, and maintenance alerts.
• Power Supply & Charger: 120/230 VAC input, 24 VDC regulated output, 7–18 AH battery support, and high/float charge voltage regulation.
• Programming & Interfaces: Field or PC programmable with Autoprogram, password protection, printer and LCD interfaces, remote modem access.
• Event History & Diagnostics: Stores 650 non-volatile events with real-time clock, shadow history, walk test checks, and PAS presignal support.
• Annunciation & Expansion: LCD-80, ACS series annunciators, LDM custom annunciation, and printer support over EIA-485.
• Regulatory Compliance: Compliant with NFPA 72, UL-listed; offers flexible regional formatting (e.g., European time/date).
• Retrofit Detector Support: Compatible with various non-Notifier detectors using FZM-1 interface for legacy system upgrades.

Specifications

Contact Safety Shops for pricing, delivery and project support in the UAE.